Stealth-RO150™/Stealth-RO300™ Replacement Membrane

Sold out
$98.95
$89.06
SKU 75834

hydrologic copy

 Replacement Membrane for the Stealth-RO150™ and Stealth-RO300™ (ORDER QUANTITY 2 FOR STEALTH-RO300)

Overview:

  • 98+% PPM Rejection
  • Rated at 2 GPM
  • Filters up to 150 GPD (gallons per day)
  • Replace between 6 months to 2 years

THERE ARE TWO INDICATIONS AS TO WHEN TO CHANGE YOUR MEMBRANES

  1. Test the RO and source/inlet water to see what percentage of the inlet water’s PPM the Stealth-RO150 is filtering out (rejection %). You should see approximately 98% of the inlet PPMs being removed when the membrane is new. If the rejection % falls under an acceptable level (typically 90%) it’s time to change the membrane
  2. When the flow rate of the product water slows down significantly. This can also happen if your pre-filters are clogged. If you change your pre-filters and the product water still flows slowly then it’s an indication you need a new membrane. When it doubt contact HydroLogic

Flow rates of RO systems are based on source water @ 65 psi / 77° / 500 ppm

 

Specs:

  • Membrane Type: Thin Film Composite
  • Maximum Operating Temperature: 113°F (45°C)
  • Maximum Operating Pressure: 100 PSI
  • Maximum Feed Water Turbidity: 1 NTU
  • Maximum Feed Sit Density Index (SDI): 5 SDI
  • Chlorine Tolerance: <0 PPM
  • Dimensions (H x W): 12" x 2.125"
  • Weight: 0.525 lbs

      You recently viewed

      Clear recently viewed